800 703 048
Free hotline
Standard heater - Dafi Heaters

The Standard heater

A convenient way to heat water. By mounting close to water intake point, minimalizes waiting time for hot water. The water does not lose heat by flowing through the pipes. Also relatively decreases electricity consumption. Heating water takes place only after turning the tap on. You decide when and how much water you wish to heat up!

– Designed to be mounted under the sink
– Provides hot water at one point
– Can be installed with faucet and tap (included)
– Power from 3.7 kW to 5.5 kW (depending on model)
– Made of recyclable plastic
– 3 years warranty
– IPX5 degree of protection
– Available with three types of spout:
    – White plastic spout with Easy Clean aerator
    – Plastic chrome spout with Easy Clean aerator
    – Metal spout with Easy Clean aerator
Heater power 3,7 kW 4,5 kW 5,5 kW
Rated power consumption [W] 3680 4500 5500
Rated voltage [V] 1/N/PE~230V 50Hz
Rated current [A] 16 19,6 24
Automatic fuse [A1] 16 20 25
Water efficiency measured in l / min at 15 ′ C entering water temperature and 200,000 Pa (2 atm) pressure 40′ C
45′ C
[B1]
1,9
1,7
2,4
2
2,9
2,5
Connection plug +*
Resistance (w 15’C) 1300 ohm cm
Level of security IPX5
1.5m electric cable 3 × 2,5mm

The required water pressure above 100,000 Pa (0.1 MPa) is required for the proper operation of the heater - 230 V heaters
* according to the standards, the E-type connection plug can only be used with a current load of up to 16 A.

400V
two-phase
Heater power 7,5 kW 9 kW 11 kW
Rated power consumption [W] 7500 9000 11000
Rated voltage [V] 2/PE~400V 50Hz
Rated current [A] 18,75 22,5 25
Automatic fuse [A1] 20 25 32
Water efficiency measured in l / min at 15 ′ C entering water temperature and 200,000 Pa (2 atm) pressure 40′ C
45′ C
[B1]
4
3,3
4,7
4
5,8
5,1
Connection plug
1300 ohm cm – 15′ C
Level of security IPX4
1.5m electric cable 3×2,5mm 3x4mm

Dimensions of the heater

(without battery and spout)
Height 187 mm
Width 90 mm
Depth 85,5 mm
Spout length 135 mm, 180 mm, 225 mm
Heater power [US] 4 kW 5 kW 6 kW
Rated Power Consumption [US] 4000 W 5000 W 6000 W
Rated voltage [US] [V] 1/N/PE~240V 60Hz
Rated current [US] [A] 16.7A/14,37 Ω 20,8A/11,53 Ω 25A/9,6 Ω
Automatic fuse [US] [A1] 20 25 25
Water efficiency measured in l / min at 15 ′ C entering water temperature and 200,000 Pa (2 atm) pressure [US] 40′ C
45′ C
0,5 GPM
0,45 GPM
0,63 GPM
0,52 GPM
0,76 GPM
0,66 GPM
Minimum water pressure [US] 1 atm
Recommended cable [US] 10 AWG
Protection class [US] IPX5
Water connection [US] ½ NPT
400V
two-phase
Heater power 7,5 kW 9 kW 11 kW
Rated power consumption [W] 7500 9000 11000
Rated voltage [V] 2/PE~400V 50Hz
Rated current [A] 18,75 22,5 25
Automatic fuse [A1] 20 25 32
Water efficiency measured in l / min at 15 ′ C entering water temperature and 200,000 Pa (2 atm) pressure 40′ C
45′ C
[B1]
4
3,3
4,7
4
5,8
5,1
Connection plug
1300 ohm cm – 15′ C
Level of security IPX4
1.5m electric cable 3×2,5mm 3x4mm

Dimensions of the heater

(without pressure connection)
Height
Width
Depth
3,7 kW – 4,5 kW
4,5 kW – 7,3 kW
Do you have any questions ??? Call us and talk to one of our consultants or send an email.
+48 800 703 048
info@dafi.pl